I was asked this question yesterday via email… Manager What should I be looking for when my guys process? My Response There the 5 things that I always look for: Rule 1 – Make one process change at a time Rule 2 – Make significant changes Rule 3 – If a change does not help, […]
Category Archives
Plastics Technology
More on Robots vs. Automation…
This question came up as a follow-up question to a recent blog about robotics and automation… GH Would a part diverter be classified as robotics or automation? My Response The general rule I always follow is: If it is programmable, it is a robot… if not, it is automation. Therefore, if the diverter acted as […]
Automation vs. Robotics…
I was asked the following question by a technician the other day… Bob What is the difference between automation and robotics? My Response Automation generally refers to any component which performs a basic repetitive task; such as conveying or sorting parts. In general, robotics are more complex devices which are programmed to perform advanced repetitive tasks; such as […]
More About Processing PVC…
I received this follow-up question regarding the processing of PVC… MT I would like to know if it is safe to mold parts in PVC and acetal in presses that are next to each other? My Response It should be safe to process, but it is critical that you vent the fumes from both machines to prevent corrosion of […]
Caveat Emptor: Selling Older Machines…
I was recently working with a company who had an interesting tale regarding the sale of one of their larger, older, hydraulic molding machines with a very large cylinder clamping unit and corresponding hydraulic reservoir… Engineer When we were trying to sell one of these pieces of junk, my recommendation was to drain the oil and sell it […]