Just because you know the parts is supposed to 90-95% full does not mean you are actually practicing it. In a recent on-site training session the participants all understood the importance of molding a part short during 1st Stage Injection, but learned an important lesson in the lab. Situation: In lab, we were establishing the first stage […]
Author Archives
Routsis Training
Check the Melt Temperature
Unless you actually measure the melt temperature, you really do not know what is happening with the material. Recently at a molding facility, we encountered a 65 F (36 C) difference between the melt temperature and barrel temperature. Comment from Technician: We always have to to run this mold with a hot material to get it to fill. […]
Is MFI Better than Nothing?
Having the Melt Flow Index of a material does not provide a real picture of how the polymer will actually process, but it can be a helpful indicator in some cases. This post will outline an example of how the data can be of use to a technician. Question: MFI is not supposed to be an accurate measurement of […]
Rear Zone Temperature Study
It is critical that your perform a rear zone temperature study on each of your molding machines. Just because two machines have the same brand and are running the same material, the optimal rear zone temperature is most often different. Question: We run the same grade of PP on all our jobs and all the […]
Monitoring Power Consumption
One great way to get your employees excited about energy reduction is to provide a method of monitoring energy consumption. If your employees can actually see that a change, such as increasing 1st stage injection speed or reducing 2nd stage packing time, actually reduces the power consumption it can become a very empowering experience. There are many […]